another bridle plan request, beamer 3.6

[Alex]

Hi,

on this oler model of the Beamer, you mainly found primary bridlelines. There are no secondary one excpet of the flying line toggle.
So you can use 40-50kp corded dyneema line for the complete rebridleling. Just use a short piece 150kp line for the toggles.
We used aroun50kp prestreched polyetser line on that kite, but that will be hard to find. So the corded dyneema/spectra line is the better choice.

Best Regards

Alex

[gummybat]

i dont have any lines on the foil at the moment to refer to so i am assuming by blue/green you are refering to the rear brake lines and the red is the front main power line, i have assumed right??

[Michael]

Hello!

We suggest you use the following line strengths:

Green / Blue : 45kg – 50kg

Red : 150kg

Greetings,

Michael

[gummybat]

excellent thanks so much, this will help so much, have you any idea on line strength (breaking strain)??

[Alex]

Here you go: KLICK

[gummybat]

Hi just picked up two hq beamer 3.6m foils with no bridle lines attached (well some but not all) is there are any where i can get the bridle layout and lengths for a 3.6m beamer (i believe mk1) like the one attached in the picture. cheers in advance,