F-Box bridle setup

[brit ken]

Thank you Alex for your reply ,,,a little red faced here ,,,ok what happen ,,,,the bridle end was attach to one of the four uprights for tidiness from HQ when I received the kite ,,,,,,,I thought it was part of the set up for the bridle ,,,,all I had to was remove it and fly it ….. after reading your post i removed it and the kite fly’s great ,,got there in the end ,,,,,,,,,,this is a great kite but it dose need good wind even with all the sails on ,,,,,a good 4 – 5 mph …I am going to use it for camera lifting ,,,,,i will post pictures if you can on this forum photos from my local area thanks again Alex ,,,,,,,,,,,,,,also if i may add to any one that’s got a Butterfly kite, Papillon,,,,i have some great modes with photos to explain how ...this is one great kite I fly it all the time .i have got this kite working in next to zero wind and its a must have kite thanks again,,,,,, Ken

[Alex]

Hi,

you've two possibilitys to attach the bridle. For lighter wind use the bridle with the several bridlelines on the kite. Fo stronger wind use only the smal bridle toggle that you should find on one end of the long spars.

The flying line has to be attached with a larks head knot like shown in the manual.

Best Regards

Alex

[brit ken]

Hello i am new to the forum and kite flying,,,well just a year now with my 2 sons . We need a little help with the bridle set up for the F-box we have assemble the kite that was ok but i don't understand the bridle and couldn't follow the instructions for it . Any help would be greatly appreciated many thanks Ken and my 2 sons